This guide provides a detailed explanation of the different ejector modes available on KEBA Version 1-3 control systems. It is designed for operators, technicians, and engineers who need to configure ejector settings based on production requirements.
The KEBA Ejector Settings Guide describes the four ejector modes and their applications:
✔ No Mode – Ejectors remain in the retracted position during Semi and Auto mode; only move in setup mode
✔ Hold Mode – Ejectors extend and stay extended in Semi mode, retracting only when the operator door is opened and closed
✔ Continuous Mode (Cont) – Ejectors cycle a defined number of times upon activation in both Semi and Auto modes
✔ Vibrate Mode (Vib) – Ejectors move in a predefined sequence, alternating between extension and retraction for improved part release
The guide also includes setup instructions, troubleshooting notes, and best practices to ensure ejector functionality is correctly optimized for production.