To Update the "Crosshead Table"

TO update the “Crosshead Table”

Files should be put in the USB Stick directly.

1.Close electrical source ,Open USB plastic covers, and then insert a U-disc (including program files ) and to any of three USB connectors in the Fig (1).（The USB connector on CIPC is Recommended） 

Fig (1) three USB connectors on the display 

2.Use the fourth grade password(it is “020808”) when the machine is running, press "Mold Info", then press "Mold Info" and choose "Crosshead Table" from File Type ,run the software which named “alpha2300” from E disk.

Finish it ,it is Ok